Fandom

Suzuki DR650 Wiki

Electrical

43pages on
this wiki
Add New Page
Talk0 Share

The DR650 comes with "safety" switches on the clutch and side stand. Both can be a pain and prone to malfunction, which will completely disable the bike. The clutch switch is especially vulnerable in a crash and can cause all sorts of trouble.

The easiest way to do it is to remove the switch, either one, and chase the wire lead. The clutch switch goes into a pair of bullet connecters behind the headlight and as one is male and one is female just plug one into the other to short it out and it's all done.

Pretty much the same for the side stand switch, except that switch plugs into a special harness under the seat. Clip the wires from the switch and using a solderless butt connector, just connect the two wires together and call it good.

Very easy to do.


Links That Can Help Edit


Need a connector for the power wires behind the headlight ?

http://www.vintageconnections.com/mail_order_form.htm

Go to;

OEM

Multi-pin 2.8mm Spade-Based Latching

Connector Pairs

Select;

HP2 Set

White Nylon

Return to DRRiders.com

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.